基于变量决策层的启发式变量选择策略

启发式分支策略是SAT求解器中不可或缺的一部分，直接影响求解器的效率。早期的启发式分支决策需要遍历整个子句数据库，效率比较低。随着独立变量状态衰减和（Variable State Independent Decaying Sum, VSIDS）分支策略的出现，SAT求解器的效率有所提高，但VSIDS策略以及它的延伸策略中变量的增量都只是与变量的冲突次数有关，没有考虑变量的决策层在分支策略中的影响。因此当发生冲突时，如果与冲突有关的变量的得分相同而决策层不同时，对于变量的选择就具有随机性。基于此，本文在阐述变量的决策层的重要性之后在VSIDS策略的基础上，提出一种基于变量决策层的启发式变量选择策略--HSVDL策略。然后通过实例显示HSVDL策略在变量决策阶段选择决策层低的变量的可能性比选择决策层高的变量的可能性要大，而且得分比较小，减少了内存的占用。最后通过实验表明HSVDL策略能够求解出更多的实例，求解器的效率也有所提高，说明该策略有一定的优势。     

Homotopy continuation enhanced branch and bound algorithms for strongly nonconvex mixed-integer nonlinear optimization

Large-scale strongly nonlinear and nonconvex mixed-integer nonlinear programming (MINLP) models frequently appear in optimization-based process synthesis, integration, intensification, and process control. However, they are usually difficult to solve by existing algorithms within acceptable time. In this study, we propose two robust homotopy continuation enhanced branch and bound (HCBB) algorithms (denoted as HCBB-FP and HCBB-RB) where the homotopy continuation method is employed to gradually approach the optimum of the NLP subproblem at a node from the solution at its parent node. A variable step length is adapted to effectively balance feasibility and computational efficiency. The computational results from solving four existing process synthesis problems demonstrate that the proposed HCBB algorithms can find the same optimal solution from different initial points, while the existing MINLP algorithms fail or find much worse solutions. In addition, HCBB-RB is superior to HCBB-FP due to much lower computational effort required for the same locally optimal solution.     

Mechanical properties of continuous bamboo fiber-reinforced biobased polyamide 11 composites

This study is devoted to the analysis of the properties of continuous bamboo fiber (BF)-reinforced polyamide 11 (PA 11) composites. The SEM observations highlighted continuity between BFs and the polymeric matrix showing a high density of hydrogen bonds. The comparative calorimetric study of the matrix and its composites showed that the crystallinity of PA 11 was not modified by the presence of bamboo fibers. The physical aging observed in PA 11 is no more observed in composites due to physical interactions between PA 11 and BFs. The mechanical properties were investigated by tensile strength and dynamic mechanical analysis. The introduction of BFs enhanced Young's modulus of the matrix by a factor of 10. The presence of BFs also improved the storage shear modulus G′ over the whole temperature range. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47623.     

主回路滞流分支管振动超标的原因分析与设计优化

在某核电厂热态功能试验中，巡视发现主回路的某滞流分支管振动超标。根据实测振动随温度变化的趋势、管道固有声模态分析和模态分析等，推测管道内流体的声振动激励引发管道共振。根据滞流管三通处流体的漩涡脱落频率计算和声振动频率计算，推测漩涡脱落与滞流管内流体的固有声振动频率锁定，引发声振动激励放大。综合分析计算和实测结果，确定滞流管振动超标的原因为流声固耦合振动。对管道支架进行了优化，以错开声固耦合共振频率，在三通处倒圆角削弱漩涡脱落，以降低流声耦合的声振动幅值。优化后的分支管振动会明显降低，以保证承压边界的安全。     

两台竹浆碱回收锅炉NOx、SO2排放的探讨

根据两台竹浆碱回收锅炉的实际运行情况,对其结构与运行对污染物排放的影响进行了比较、分析。     

A fast branch,bound and remember algorithm for disassembly line balancing problem

In recent years, the interests of disassembly line have increased owing to economic reasons and the increase of environmental awareness. Effective line can provide many advantages in terms of economic aspect and it facilitates competition the companies with others. This study contributes to the relevant literature by a branch, bound and remember algorithm for disassembly line balancing problem with AND/OR precedence. The proposed exact solution method employs the memory-based dominance rule to eliminate the reduplicated sub-problems by storing all the searched sub-problems and to utilise cyclic best-first search strategy to obtain high-quality complete solutions fast. In this paper, minimising the number of stations is taken as the performance measure. The proposed methodology is tested on a set of 260 instances and compared with the mathematical model using CPLEX solver and five well-known metaheuristics. Computational results show that the proposed method is capable of obtaining the optimal solutions for all the tested instances with less than 0.1?seconds on average. Additionally, comparative study demonstrates that the proposed method is the state-of-the-art algorithm and outperforms the CPLEX solver and metaheuristics in terms of both solution quality and search speed aspects.     

动态高压微射流处理对方竹笋膳食纤维理化及结构特性的影响

以方竹笋中提取的膳食纤维为研究对象，采用动态高压微射流（dynamic high-pressure micro-fluidization, DHPM）在不同压力条件（0，50，100，150，200 MPa）下进行处理，探究其对竹笋膳食纤维（bamboo shoots dietary fiber, BSDF）理化和结构特性的影响。结果表明，随着处理压力的增大，BSDF粒径先增大后减小，当处理压力为150 MPa时，粒径最小，为（370±11） nm，此条件下BSDF的持水力、持油力和膨胀力达到最大，较对照组分别提高了47.74%，50.54%，61.27%，且差异显著（P<0.05）。红外光谱分析表明DHPM处理不会改变BSDF的官能团，但会使BSDF内部的部分氢键断裂和半纤维素、木质素等发生降解；X射线衍射和热重分析表明DHPM处理不会引起BSDF的晶体结构改变，但晶体有序度会下降，进而导致其热稳定性降低；微观结构分析显示DHPM处理会使BSDF颗粒尺寸减小、表面粗糙、组织松散，且当处理压力为200 MPa时，颗粒发生团聚。综上，DHPM可以有效改善BSDF的理化性质，在膳食纤维改性方面具有一定的应用价值。     

低压静电场辅助冷冻对竹笋品质的影响

为研究低压静电场辅助冷冻对竹笋冻结特性的影响，以冻结曲线、硬度、水分损失率、水分迁移、冰晶形态和组织微观结构为指标，探究低压静电场辅助冷冻（－35 ℃）和普通冷冻（－35 ℃）条件下竹笋品质的变化规律。结果表明：低压静电场辅助冷冻提高了冻结效率，改变了冰晶形态及分布，减轻了组织微观结构破损程度，改善了解冻汁液流失情况。与静电板间距10、20、30、40 cm处的冷冻竹笋解冻后水分损失率分别为14.16%、12.58%、9.73%、10.44%，显著低于对照组（21.01%）（P＜0.05），硬度分别为461.19、507.48、496.65 g和455.31 g，显著高于对照组（350.70 g）（P＜0.05）。低场核磁共振分析结果表明，在低压静电场辅助冷冻下竹笋解冻后汁液流失减少，扫描电子显微镜观察结果显示，竹笋纤维排列整齐，组织微观结构保持较好。低压静电场辅助冷冻可有效改善竹笋品质，可为利用低压静电场进行果蔬的冷冻贮藏和冷链运输提供参考。     

Production scheduling under uncertainty of an open-pit mine using Lagrangian relaxation and branch-and-cut algorithm

ABSTRACT

The life-of-mine optimization of open pit mine production scheduling under geological uncertainty is a computationally intensive process. Production scheduling determines the optimal extraction sequence by maximizing net present value (NPV). In this paper, an algorithm is proposed to schedule an open pit mine under geological uncertainty, where instead of solving the whole problem at once, the production schedule is generated by sequentially solving sub-problems. The sub-gradient method is used to generate the upper bound solution of a Lagrangian relaxed sub-problem. If the upper bound relaxed solution is infeasible, a mixed integer programming is applied to the latter solution. The algorithm is validated by solving six problems and is compared to the linear relaxation of the original production scheduling problem. The results show that the proposed algorithm generates a solution that is very close to optimal, with less than a 3% optimality gap. An application at a copper mine, where geological uncertainty is quantified with geostatistical simulations of the related orebody, shows that all constraints are satisfied and an 11% higher NPV is generated when compared to the corresponding deterministic equivalent of the proposed approach, while a 26% higher NPV is generated compared to a common conventional industry approach.     

通风管理FPVS系统及其应用研究

应用新型数据库系统及先进算法语言，研制出通风管理ＦＰＶＳ系统。在通风网络解析方面，采用“通路法”及“节点邻接分支矩阵余子式法”，取得了很好效果。运行正常，输出结果准确，对安全生产和防止事故起到很好作用，经济效益明显。